Roux R-1F Matte Black Fiberglass SA2020 helmet is Roux’s entry-level R-1- series helmet featuring a

FIA standard 8860-2018 GP-7 SRC

The GP-7 SRC is an absolute masterpiece of Arai engineering,

The GP-6S is designed with the sport driver in mind (hence the "S" designation). It uses the same

The CK-6 is specially made for junior Kart drivers up to 15-years old. It meets the FIA CMR 2016

The carbon fibre GP-6 RC incorporates the very best Arai technology to meet the FIA 8860-2010

The ROUX R-1C Composite helmet is SNELL 2015 and FIA 8859 rated. It includes an integrated water drink

The ROUX R-1CF Gloss Carbon Fiber helmet is SNELL 2015 and FIA 8859 rated. It includes an

The Arai GP-J3 is another example of Arai's pursuit of comfort and function in one attractive

The successor of the respected GP-6 series, the longest running and most successful Arai GP model,

The ROUX Helmets IMSA Radio/Drink Tube Assembly connects your radio-gear-equipped Roux helmet to your

The SK-6 is largely base on the GP-6S, but is specially developed for kart racing, including a

Extreme is a new environmentally friendly gas fire extinguisher system which uses 3M's Novec 1230, a

This kit has been specifically designed to replace the original SPA 400A Electrical system that was

NEW - FIA 2018 approved AFFF-AR (water-based foam - Alcohol Resistant) system with Electrical (&

The SPA Technique 305mm D-Shaped 3 spoke steering wheel suitable for single seater/formula race

This hand held extinguisher is filled with 2.4 litres of AFFF extinguishant and meets MA/CAMS

The SPA Design Extreme Gas 2.25kg electrical fire extinguisher system is designed for open cockpit

The SPA Technique QR-1 Formula steering wheel quick release boss is designed to fit single seater

The SPA Technique 6 Hole Quick Release Boss, suitable for saloon, touring and rally car

NEW - FIA 2018 approved AFFF-AR (water-based foam - Alcohol Resistant) system with mechanical

These pump up air pads are suitable for use with any FHR device and provide much better comfort

The Racing 2 series FHR device from Stand 21 is manufactured from a carbon/resin mix and injection

The Club range of FHR devices from Stand21 are a fantastic value entry level solution for racers

The Stand21 Ultimate series is one of the lightest FHR device to date and is currently used by

These Stand21 FHR Posts are designed to fit to Motorsport helmets which have a M6 female threaded

The Club Series 3 FHR device is made from injected resin and has been directly engineered from the

The Stand21 Featherlite Series FHR Device is the lightest device currently available. It is made from

The FHR sliding tether set is FIA 8858-2010 approved and allows a greater freedom of movement in

Schroth success in endurance racing has been built on durability, quality and speed. The

The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non

Schroth's Clubman has one aim. Provide a superior harness for people needing a lower cost belt.

The

The Schroth Speedway Latchlink II features Frontal Head Restraint (FHR) specific 2” shoulder belts,

The Schroth Flexi 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Flexi

MSRG are proud to offer Stand 21 Official Porsche Motorsport collection which incorporates technology

MSRG are proud to offer Stand 21 Officially Licensed Racewear technology and equipment now to

MSRG are proud to offer Stand 21 Official Porsche Motorsport collection which incorporates technology

The Apex glove is perfect for rookies and crew members when FIA gloves are required. Don't make it's

MSRG are proud to offer Stand 21 Officially Licensed Racewear technology and equipment now to

MSRG are proud to offer Stand 21 Officially Licensed Racewear technology and equipment now to

Power dry your race suit with the HangAir Drying System, that dries in hours, not days.

Using a

P1 Club is a newest addition to the P1 range - It is  is a new design to offer a Italian made suit

P1 Nomex socks are approved to FIA 8856-2000 standard and eligible for all International

Developed in collaboration with Dr. Terry Trammell and Ms. Jenny Stewart, technical commissioner in charge

GREAT SHOES AT A SMALL PRICE

You really feel it's made in Italy, really not comparable with other

The legend lives on! Outside Seam II Racing Gloves are latest outside seam glove updated to the

One point prevailed during the design of the Top Fit balaclava: Optimum fitment!

Top Fit Balaclava features

The new P1 Lap suit is made to the latest FIA 8856-2018 standard this suit has been extremely

Great for all types of RACING!

A larger shoe base compared to most racing shoes...

Our best

The Protex Motorsport R-2 is the top of the range case available from Protex, the R-2 has a place for your

MSRG are proud to offer Stand 21 Officially Licensed Racewear technology and equipment now to

P1 Smart Passion features stretch material on both sides for added comfort especially for the