**COMING SOON**

The Stand21 Featherlite Series FHR Device is the lightest device currently available. It is made from ultra high strength carbon composites that provide the highest levels of safety at the incredibly low weight of only 310 grams (bare). The device features a new and more ergonomic leg design and also a new revolutionary strap passage. The device is currently being used by the worlds top racing drivers including Lewis Hamilton.

It has a revolutionary strap passage design that passes through the device. The rear is flat so there are no obstructions that would normally cause discomfort between the device and your race seat

The Ultra lightweight design will make you feel like you are not wearing a device on at all

Wearing a head restraint device approved by the FIA is mandatory for all drivers in CAMS/MA circuit racing

The Featherlite is available in the following angles:
20º: recline suitable for most saloons, GT’s and rally cars or other applications with more upright seating positions
30º: recline suitable for most single seater, formula cars and sports prototypes

The Featherlite range of FHR devices are available in two different sizes:
Medium: Neck circumference between 38 and 45.5 cm (15 to 18“)
Large: Neck circumference over 45.5 cm (18”)

Weight : Under 400g including padding and tethers (310g bare)

FIA 8858-2010 approved

*Helmet posts are not included and are available separately.

Brand Stand 21
$0

The Stand21 Ultimate series is one of the lightest FHR device to date and is currently used by many F1 drivers. Exceptional ergonomics, geometrics and a lighter weight all combine to give you, the driver, the very best that money can buy.

Using all of their over 15 years expertise in FHR design and engineering, taking over two years in development, the Ultimate weighs in at just 390g bare (490g including padding and tethers), a full 100 grams lighter than the current top-level device. The all-carbon bodies of these models combine an exclusive resin-transfer technology (RTM process) with a UD monolithic section. That refined monolithic technology has allowed a new design for the unit's arms. Their thickness is greatly reduced (4mm V’s 14mm for current models) as well as their footprint to improve the fit between driver and harness.

The arched top has been re-engineered and re-designed in its entirety, offering a reduction of its physical thickness to below 2mm, allowing a reduction of helmet-to-seat (or headrest) space to improve safety.

Wearing a head restraint device approved by the FIA is mandatory for all drivers in CAMS/MA circuit racing

The Ultimate is supplied with black padding and sliding tethers allowing for greater head motion. FHR clips / posts are not included but are available separately.

The Ultimate is available in the following angles:
20º: recline suitable for most saloons, GT’s and rally cars or other applications with more upright seating positions
30º: recline suitable for most single seater, formula cars and sports prototypes

The Club range of FHR devices are available in two different sizes:
Medium: Neck circumference between 38 and 45.5 cm (15 to 18“)
Large: Neck circumference over 45.5 cm (18”)

Weight : Under 490g including padding and tethers (390g bare)

FIA 8858-2010 approved

*Helmet posts are not included and are available separately.

Brand Stand 21
$2099

The Club Series 3 FHR device is made from injected resin and has been directly engineered from the Ultimate shape. This offers the best comfort and ergonomics on the market and reduces its weight to match other competitive carbon devices. The Club 3 has the amazing ergonomics of the Ultimate with specific extra thin legs for a more comfortable fit.

Wearing a head restraint device approved by the FIA is mandatory for all drivers in CAMS/MA circuit racing

Standard features include a sliding tether system for less restrictive movement and shoulder pads for better comfort. A fitment guide is also included.

Available in 20 degree recline which is suitable for saloon cars or other cars with upright seating positions.

The Club range of FHR devices are available in two different sizes -
Medium - Fits collar sizes 38-45.5cm (15-18")
Large - Fits collar sizes above 45.5-48cm (18-19")

Weight: 690g with padding and tethers (590g bare)

FIA 8858-2010 Approved

*Helmet posts are not included and are available separately.

Brand Stand 21
$499
* Size:



The Racing 2 series FHR device from Stand 21 is manufactured from a carbon/resin mix and injection moulded making it exceptional value. The Carbon construction keeps the weight down to just 850g (including padding and tethers) and is the only XL device available in the world from any FHR manufacturer.

Wearing a head restraint device approved by the FIA is mandatory for all drivers in CAMS/MA circuit racing

Standard features include a sliding tether system for less restrictive movement and shoulder pads for better comfort. A fitment guide is also included.

Available in 20 degree recline which is suitable for saloon cars or other cars with upright seating positions.

Only available in XL - Fits collar sizes 48-53cm (19-21") Collar size

Weight: 780g including padding and tethers (680g bare)

FIA 8858-2010 approved

*Helmet posts are not included and are available separately.

Brand Stand 21
$799

The Club range of FHR devices from Stand21 are a fantastic value entry level solution for racers looking for an FHR system on a budget, without compromising safety.The Club range of FHR devices are constructed from a honeycomb thermoplastic which helps to keep the weight down and allows it to pass the FIA test requirements.

Wearing a head restraint device approved by the FIA is mandatory for all drivers in CAMS/MA circuit racing

Standard features include a sliding tether system for less restrictive movement and shoulder pads for better comfort. A fitment guide is also included.

Available in 20 degree recline which is suitable for saloon cars or other cars with upright seating positions.

The Club range of FHR devices are available in two different sizes -
Medium - Fits collar sizes 38-45.5cm (15-18")
Large - Fits collar sizes above 45.5-48cm (18-19")

Weight: 880g including padding and tethers (780g bare)

FIA 8858-2010 approved

*Helmet posts are not included and are available separately.

Brand Stand 21
$399
Size:



Subcategories