The Schroth Speedway Latchlink II features Frontal Head Restraint (FHR) specific 2” shoulder belts, and 2” laps belts with SFI 16.1 certification.

The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR device, creating optimal force distribution on the surface of the device.

All points on a Latchlink II belt come with wrapped in hardware. Bolt-in or snap-in hardware must be purchased separately but can be installed on any point.

Optional Pull Up 2” Sub belt available separately.

Colour

• Black

Components

• Shoulders: Pull Down 2"
• Laps: Pull Up 2”
• Subs: No Adjust 2" or Optional Pull Up 2”

End Fittings

• Shoulder: wrapped-in
• Lap: wrapped-in
• Subs: wrapped-in

Latchlink Fixed Point

• Right Hand Lap Belt

Homologation

• SFI 16.1

Schroth success in endurance racing has been built on durability, quality and speed. The Enduro-Belt is packed with features which will reduce your driver change times!

The Enduro 2x2 features Frontal Head Restraint (FHR) specific 2” Enduro shoulder belts, 2" Enduro Lap Belts, and a T-bar adjustable sub strap. All points are able to be wrapped in, so you can use either snap or bolt in end fittings

Schroth’s top-of-the-line racing harness uses the widely praised "ZIP Adjuster”. Integrated into the lap belt buckle attachments, “ZIP Adjusters” optimise the position of the adjusters for perfect tightening. The design of the "ZIP Adjusters" allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes.

Features:

• Simple and easy to adjust "ZIP Adjusters" integrated into the lap belt latches
• Extra large, easy to see Yellow "hand loops" on the lap belts
• Clearly marked lap belt release straps
• Pull-tabs on shoulder belt adjusters

Colour

• Black

Components

• Shoulders: Pull Down 2"
• Laps: Pull Down 2"
• Subs: Pull Up 2"

End Fittings

• Shoulder: snap-in bracket / optional wrapped-in
• Lap: snap-in bracket / optional wrapped-in
• Subs: snap-in bracket / optional wrapped-in

Cam Lock Fixed Point

• Anti-Sub Strap

Included Hardware

• 6 x 7/16 Eye Bolts
• 2 x Backing Plates
• 12 x Wavy Washer

Homologation

• FIA 8853-2016

The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non adjustable formula lap belts, and individual non adjustable sub straps.

What makes the Formula 2x2 different? The fabric loops!

The sub-straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous formula belts has been replaced with sewn in webbing, creating a more light weight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. 

This belt is typically used in open wheeled or sports cars with very reclined seating positions. This belt is not recommended for use in traditional road cars, or vehicles with more upright seating positions.

Comes with wrapped bolt-in attachments at all six points. Snap in attachments can be purchased separately.

Colour

• Black

Components

• Shoulders: Pull Down 2"
• Laps: No Adjust 2"
• Subs: No Adjust 2"

End Fittings

• Shoulder: bolt-in bracket / optional wrapped-in
• Lap: bolt-in bracket / optional wrapped-in
• Subs: bolt-in bracket / optional wrapped-in

Cam Lock Fixed Point

• Right Hand Lap Belt

Included Hardware

• 6 x 7/16 Bolts
• 2 x Backing Plates
• 12 x Wavy Washer

Homologation

• FIA 8853-2016

The Schroth Flexi 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Flexi Lap Belts, and a T-bar adjustable sub strap.

The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR device, creating optimal force distribution on the surface of the device.

What makes the Flexi belts different from the Schroth lineup? The reversible Flexi lap belts!

Flexi lap belts can be changed from a pull up configuration to a pull down by simply rewrapping the lap hardware. This allows you to set the belt up just the way you want it for your specific situation. It also allows for Bolt In brackets to be wrapped in for the lap belts if needed.

Comes with Snap-In attachments at Lap and Sub points. The Shoulders come ready to be snapped in. Bolt-in hardware available for purchase separately. 

Colour

• Black

Components

• Shoulders: Pull Down 2"
• Laps: Pull Up/Pull Down 2"
• Subs: Pull Up 2"

End Fittings

• Shoulder: snap-in bracket / optional wrapped-in
• Lap: snap-in bracket / optional wrapped-in
• Subs: snap-in bracket / optional wrapped-in

Cam Lock Fixed Point

• Anti-Sub Strap

Included Hardware

• 6 x 7/16 Eye Bolts
• 2 x Backing Plates
• 12 x Wavy Washer

Homologation

• FIA 8853-2016