SPA Extreme systems uses a new environmentally friendly gas extinguishant 3M's Novec 1230, a next generation halon gas replacement, this has zero ozone depletion and is non toxic.

Note: Any competitor using a Gas Extinguisher system in Rally events require a minimum 3.0kg system.

These plumbed in fire extinguishers are designed for use in closed cockpit cars. They utilise 3M Novec 1230 gas extinguishant dispersed through up to 4 multi directional nozzles to give impressive fire knockdown times and fire out properties in record times.

  • Approved to FIA technical list 16 for use in Motorsport
  • Uses 3M Novec 1230 gas for faster fire knockdown and fire out times
  • Supplied with everything required to install and operate
  • Mechanical operation, more cost effective than the electrical equivalent
  • 3M Novec 1230 gas is not only highly effective at putting out fires in competition cars, it is also non-toxic, non-conductive and leaves no residue.

Kit includes:

Lightweight Aluminium Bottle
Mounting Bracket and Straps
Pull Cables
Nozzles
Tubing
T-Connectors
Decals
Instruction Manual

Dimensions: Length (Inc Head) 228mm, Diameter 160mm
Cylinder Weight: 4.60kg
Installation Kit Weight: 1.15kg

FIA Technical list 16 approved - FIA Homologation number EX.053.18

Brand SPA Technique
$1700

This hand held extinguisher is filled with 2.4 litres of AFFF extinguishant and meets MA/CAMS requirements for stage rallying.

Supplied with mounting bracket and quick release straps for easy mounting to the car
Quick release straps to release easily should the extinguisher be needed

AFFF is a water based foam extinguishant with excellent coverage. It has excellent fire knock down properties and leaves a film which helps prevent re-ignition of the fire.

Dimensions: Length (Inc Head) 457mm, Diameter 115mm
Cylinder Weight:
3.40kg
Installation Kit Weight:
0.20kg

Brand SPA Technique
$200

SPA Extreme systems uses a new environmentally friendly gas extinguishant 3M's Novec 1230, a next generation halon gas replacement, this has zero ozone depletion and is non toxic.

Note: Any competitor using a Gas Extinguisher system in Rally events require a minimum 3.0kg system.

These plumbed in fire extinguishers are designed for use in closed cockpit cars. They utilise 3M Novec 1230 gas extinguishant dispersed through up to 4 multi directional nozzles to give impressive fire knockdown times and fire out properties in record times.

  • Approved to FIA technical list 16 for use in Motorsport
  • Uses 3M Novec 1230 gas for faster fire knockdown and fire out times
  • Supplied with everything required to install and operate
  • Electrical operation for better reliability, no pull cables to snag, seize or snap
  • 3M Novec 1230 gas is not only highly effective at putting out fires in competition cars, it is also non-toxic, non-conductive and leaves no residue.

Kit includes:

Lightweight Aluminium Bottle
Mounting Bracket and Straps
Power Pack
Plug and Cable Assemblies
Cockpit Switch
Waterproof External Switch
Nozzles
Tubing
T-Connectors
Decals
Instruction Manual

Dimensions: Length (Inc Head) 228mm, Diameter 160mm
Cylinder Weight: 4.50kg
Installation Kit Weight: 1.05kg

FIA Technical list 16 approved - FIA Homologation number EX.029.09

Brand SPA Technique
$2150

**SPECIAL** SPA Technique 10lbs Late Model System
Normally $1500, we have four systems available for $1200!!

This system is SFI 17.1 Certified and exceeds the requirements for fire suppression for the Dirt Late Model rules in the US. We have delivered over 600+ of these PRI award winning systems to US Late Model competitors!!

As the designated SPA sales & service agent in Australia we can commission and service these units, making sure that they comply at all times to the SFI standard.

Details of this system:
- 10lbs. of FireAde2000® foam agent
- Lightweight bottle
- Automatic activation: Remote Mounting Block with thermal bulb(80°C standard - higher temps available)
- Manual activation: Lanyard (pull cable optional)
- 4 x Nozzles for coverage of driver and engine bay or fuel cell
- 2 x T-fitting
- 1 x Bulkhead fitting
- 3.8m of Steel bendable tubing from thermal block to nozzles utilizing easy to use push-lock fittings
- Comes standard with stainless T-bolt panel mounts

Don't just Fight fires, Extinguish them!!

Page 2 of 3